top

Thomson TG605

Neues Thema eröffnen Neue Antwort erstellen SpeedTouchforum Foren-Übersicht | Support in English    Seite 1 von 1

23.12.2012, 20:45 BeitragTitel: Thomson TG605
mescall2000



Anmeldedatum: 23.12.2012
Beiträge: 2

Antworten mit Zitat

Hi to all! I just found a Thomson TG605. as i described on openwrt forumi want to load openwrt firmware on this router.

The original firmware on this unit is ZZ2KAG5.419

are there upgrades for this router? Howto load the new version?

Someone are able to extract files from firmwares images? The unit run linux or another operating system?


here the bootup console log:

root@ubuntu:~# minicom


Welcome to minicom 2.6.1

OPTIONS: I18n
Compiled on May 1 2012, 13:36:18.
Port /dev/ttyS0

Press CTRL-A Z for help on special keys


Decompressing Bootloader............................

Speedtouch initialization sequence started.

BOOTING THE THOMSON RTEMS KERNEL

Starting the kernel @ 0x80010000


Speedtouch initialization sequence started.


[OSI2] File "ZYW21.000": Format OSI2 compliant (offset=344, prodid="0", varid="TI").
[SS] Device mounted (prodid="0", prodname="Thomson TG605", varid="TI", varname="TG605").
[ELF] Loading file "ZYW21.000" ...
call 0x0x80081040(ZYW21.000 -t)

----------------------- OSBA -----------------------
version : bcm96348:MOD_BLDBCM96348_OSBA_V1.0.1
active device : /dev/fda1
passive device : /dev/fda2
active path : /active
passive path : /dl

Mounting /dev/fda1 as /active... success.
Mounting /dev/fda2 as /dl... success.
---------------- /active/ZZ2KAG5.419 START ----------------

[OSI2] File "/active/ZZ2KAG5.419": Format OSI2 compliant (offset=344, prodid="0", varid="TI").
[SS] Device mounted (prodid="0", prodname="Thomson TG605", varid="TI", varname="TG605").
[ELF] Loading file "/active/ZZ2KAG5.419" ...
c

Speedtouch initialization sequence started.
2rchfs opened /acFtiveo/ZZ2rKAG5 .419E offMset A1808C503
ADS L PH-Y versio n iss A2pB019eb14.ld16fe
ETcH: Dtevic e refgistoeredr: BCM634 8-E#n0.
oETH:n Device -regimsteraed: nBCM5a335#g0.
eETH: Intderfa ce 0s assignewd: BCM53i35#0:0 [textecrnalh].
ETH:( Intserfaice 1 assnignegd: BlCM53e35#0 :1 [EexteMrnalA].
ass:) Interfa.ce 2
igned: BCM5335#0:2 [external].
ETH: Interface 3 assigned: BCM5335#0:3 [external].
ETH: Device registered: SBRIDGE#0.
ETH: Interface 4 assigned: BCM6348-E#0:0 [internal].
ETH: Interface 5 assigned: BCM5335#0:8 [internal].
ETH: Internal connection: intf 5 <-> intf 4.
--- REGISTERING STREAM : ROUTING ---
MFC routing init : alloc 31744 bytes.
--- REGISTERING CONNECTION : FW ---
--- REGISTERING CONNECTION : IDS ---
--- REGISTERING STREAM : LABEL ---
--- REGISTERING STREAM : IPQOS ---
--- REGISTERING STREAM : TRIGGER ---
--- REGISTERING CONNECTION : NAT ---

************* ERROR RECORD *************
time : 000000:00:00.000000
Application /active/ZZ2KAG5.419 started after POWERON.
****************** END *****************
Unable to load language it.
Value required for parameter 'value'
Value of parameter maxbytes [0,64] out of range
Bad value for parameter 'maxbytes'
Value of parameter maxbytes [0,64] out of range
Bad value for parameter 'maxbytes'
Invalid interface name specified.
Bad value for parameter 'intf'
Invalid interface name.
Bad value for parameter 'defaultconnection'
Invalid service name.
Bad value for parameter 'name'
Invalid service name.
Bad value for parameter 'name'
Invalid service name.
Bad value for parameter 'name'
Invalid service name.
Bad value for parameter 'name'
Username : admin
Password : *****
------------------------------------------------------------------------

______ Thomson TG605
___/_____/\
/ /\ 5.4.1.9
_____/__ / \
_/ /\_____/___ \ Copyright (c) 1999-2005, THOMSON
// / \ /\ \
_______//_______/ \ / _\/______
/ / \ \ / / / /\
__/ / \ \ / / / / _\__
/ / / \_______\/ / / / / /\
/_/______/___________________/ /________/ /___/ \
\ \ \ ___________ \ \ \ \ \ /
\_\ \ / /\ \ \ \ \___\/
\ \/ / \ \ \ \ /
\_____/ / \ \ \________\/
/__________/ \ \ /
\ _____ \ /_____\/
\ / /\ \ /___\/
/____/ \ \ /
\ \ /___\/
\____\/

------------------------------------------------------------------------
$BANNER1$
$BANNER2$
{admin}=>help
Following commands are available :

help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
ping : Send ICMP ECHO_REQUEST packets.
traceroute : Send ICMP/UDP packets to trace the ip path.
telnet : Open a telnet connection to a server.

Following command groups are available :

firewall service aaa autopvc connection
cwmp dhcp dns dsd dyndns
eth adsl atm config debug
env expr hostmgr ids igmp
interface ip ipqos label language
mbus memm mlp nat ppp
pptp router script sla snmp
sntp software syslog system tunnel
upnp user

{admin}=>
CTRL-A Z for help | 9600 8N1 | NOR | Minicom 2.6.1 | VT102 | Offline
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
 
23.12.2012, 21:58 BeitragTitel:
mescall2000



Anmeldedatum: 23.12.2012
Beiträge: 2

Antworten mit Zitat

i tryed to load via bootp alternative firmwares... here the results:
Welcome to minicom 2.6.1
OPTIONS: I18n
Compiled on May 1 2012, 13:36:18.
Port /dev/ttyS0
Press CTRL-A Z for help on special keys

Decompressing Bootloader............................
Speedtouch initialization sequence started.
BOOTP reason : BLFLAG_BUTTON_PUSH
phy_bcm6348.c : phy_init_bcm6348
phy_bcm6348.c - ETHD: external phy is used
phy_bcm6348.c : phy_init_bcm6348 - OK
phy_bcm6348.c : Initialize the Ethernet Switch MIB registers
phy_bcm6348.c : disable ethernet MAC while updating its registers
phy_bcm6348.c : issue soft reset, wait for it to complete
phy_bcm6348.c : init mii clock, do soft reset of phy, default is 10Base-T
phy_bcm6348.c : Initialize emac registers
Ctrl: BOOTP initiated.
Ctrl: BOOTP Reply received!
***** Own IP = 10.0.0.138 ()
***** Server = 10.0.0.1 ()
***** Mask = 255.255.255.0
***** Filename = ZZRXAA7.417.bin
Ctrl: TFTP started (Rx:ZZRXAA7.417.bin).
[ERROR] : FIA code is not correct !!!
***Reseting the board***
Decompressing Bootloader............................
Speedtouch initialization sequence started.
Decompressing Bootloader............................
Speedtouch initialization sequence started.
BOOTP reason : BLFLAG_BUTTON_PUSH
phy_bcm6348.c : phy_init_bcm6348
phy_bcm6348.c - ETHD: external phy is used
phy_bcm6348.c : phy_init_bcm6348 - OK
phy_bcm6348.c : Initialize the Ethernet Switch MIB registers
phy_bcm6348.c : disable ethernet MAC while updating its registers
phy_bcm6348.c : issue soft reset, wait for it to complete
phy_bcm6348.c : init mii clock, do soft reset of phy, default is 10Base-T
phy_bcm6348.c : Initialize emac registers
Ctrl: BOOTP initiated.
Ctrl: BOOTP Reply received!
***** Own IP = 10.0.0.138 ()
***** Server = 10.0.0.1 ()
***** Mask = 255.255.255.0
***** Filename = TG605s-R8265-UK-BC.bin
Ctrl: TFTP started (Rx:TG605s-R8265-UK-BC.bin).
[ERROR] : FIA code is not correct !!!
***Reseting the board***
Decompressing Bootloader............................
Speedtouch initialization sequence started.
CTRL-A Z for help | 9600 8N1 | NOR | Minicom 2.6.1 | VT102 | Offline
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
 
Neues Thema eröffnen Neue Antwort erstellen SpeedTouchforum Foren-Übersicht | Support in English    Seite 1 von 1
Vorheriges Thema anzeigen
Nächstes Thema anzeigen
Beiträge der letzten Zeit anzeigen:   




Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.