top

[SOLVED] 585i v6 + KabelBW Modem + Eigenes LAN

Neues Thema eröffnen Neue Antwort erstellen SpeedTouchforum Foren-Übersicht | Fragen zum SpeedTouch 585i    Seite 1 von 1

31.10.2012, 07:15 BeitragTitel: [SOLVED] 585i v6 + KabelBW Modem + Eigenes LAN
me.



Anmeldedatum: 31.10.2012
Beiträge: 5

Antworten mit Zitat

Hallo,

ich komme nicht weiter und benötige Hilfe beim Versuch folgende Konfiguration zu erreichen:

Hardware Verkabelung:

Kabelanschluss => Arris Modem (Kabel BW) => SpeedTouch [an einer der vier Ethernet Buchsen soll das Arris Modem hängen] => LAN

An den anderen 3 Ethernet Buchsen hängen ein Multimedia-PC, Arbeits-PC, Laptop. Über WLAN sollen sich weitere Clients ins LAN verbinden können. Alle Geräte sollen ins Internet kommen.

Gewünschte Netzwerk Konfiguration:

    - LAN hinter Kabel BW Modem: 192.168.178.0/255.255.255.0 mit DHCP im Bereich 192.168.178.100-192.168.178.200

    - Der SpeedPort soll für das LAN das DHCP erledigen (192.168.178.*)

    - Der SpeedPort soll als Gateway für die anderen Geräte dienen (gewünschte IP 192.168.178.1)


Fragen:

Ist das machbar? Wenn ja wie: Besser über die User.ini oder per Telnet?

Aktuell läuft auf dem SpeedPort eine 8-er Firmware. Eine andere kann aber aufgespielt werden.

Den Thread "[608i WL]user.ini für Betrieb hinter Kabelmodem(DHCP Client)" (siehe "http://www.speedtouchforum.de/viewtopic.php?t=2527") habe ich mir schon angesehen und versucht das bei mir zu übernehmen - leider ohne Erfolg.

Mit meiner aktuellen User.ini und bekomme ich als IP Konfiguration am PC ein:

Code:

Ethernet-Adapter LAN-Verbindung:

   Verbindungsspezifisches DNS-Suffix:
   Beschreibung. . . . . . . . . . . : Intel(R) 82566MM-Gigabit-Netzwerkverbindu
ng
   Physikalische Adresse . . . . . . : 00-1E-37-XX-XX-XX
   DHCP aktiviert. . . . . . . . . . : Ja
   Autokonfiguration aktiviert . . . : Ja
   Verbindungslokale IPv6-Adresse  . : fe80::e421:5221:1c56:5158%10(Bevorzugt)
   IPv4-Adresse  . . . . . . . . . . : 37.209.8.123(Bevorzugt)
   Subnetzmaske  . . . . . . . . . . : 255.255.252.0
   Lease erhalten. . . . . . . . . . : Mittwoch, 31. Oktober 2012 11:23:22
   Lease läuft ab. . . . . . . . . . : Mittwoch, 31. Oktober 2012 12:23:22
   Standardgateway . . . . . . . . . : 37.209.4.1
   DHCP-Server . . . . . . . . . . . : 172.30.51.13
   DHCPv6-IAID . . . . . . . . . . . : 234888229
   DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-13-3A-38-CE-00-1S-A5-24-8E-0C

   DNS-Server  . . . . . . . . . . . : 82.212.62.62
                                       78.42.43.62
   NetBIOS über TCP/IP . . . . . . . : Aktiviert


Leider komme ich so nicht mehr weiter. Hat jemand ne Idee oder einen Tipp - oder noch besser: Eine fertige User.ini Lösung Laughing ?

Wenn was an Infos fehlt, bitte nachfragen.

Beste Grüße,
me.

--- meine aktuelle User.ini ----

<wurde entfernt, weil es die korrekte User.ini jetzt gibt - siehe Antwort>


Zuletzt bearbeitet von me. am 31.10.2012, 14:33, insgesamt einmal bearbeitet
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
 
31.10.2012, 14:22 BeitragTitel:
me.



Anmeldedatum: 31.10.2012
Beiträge: 5

Antworten mit Zitat

Hurra! Juchee!

Habe es endlich selber hinbekommen.

Hat lange gedauert, aber hier eine Anleitung für alle, die das gleiche Problem haben (bitte sagt es mir, falls was ergänzt werden sollte und: Ohne Gewähr und auf eigene Verantwortung. Sollte aber nicht allzu schwer sein alles gut hinzubekommen.):



    Zur Vorbereitung sollte der SpeedTouch mit dem PC per LAN/Ethernetkabel verbunden sein.
    ACHTUNG: Nur Buchse 1-3 nehmen. Nummer 4 ist später für die Verbindung zum Kabelmodem/Internet reserviert. Das Kabelmodem kann man auch gleich an Buchse 4 anschließen.

    1. Router zurücksetzen:

    ACHTUNG: Bitte vorher unbedingt die Konfiguration speichern. Teile daraus werden später benötigt!

    Auch schon alleine darum ein Backup machen, damit bei Bedarf die Konfiguration wiederhergestellt werden kann (In der Weboberfläche auf "Konfiguration"=>"Konfiguration speichern oder wiederherstellen"=>"Konfiguration speichern" als Dateiname z.B. User_backup.ini).

    Wenn die Firmware 8.2.1.5 aufgespielt ist:
    (sieht man auf der Startseite der Weboberfläche unter "Softwareversion"):

    a. SpeedTouch einschalten
    b. Warten bis die LEDs grün sind
    c. Mit einer Büroklammer/Draht ca. 10 Sekunden den Reset-Knopf drücken (kleines Loch hinten dran) bis die Poer-LED rot leuchtet.
    d. Reset loslassen und den Neustart abwarten.

    Neue Firmware aufspielen:

    a. Firmware 8.2.1.5 (unter http://www.speedtouchforum.de/Daten/FW/585iv6/8.2/ST585v6_GeChGen_R8215_final.zip) runterladen und entpacken.
    b. Das UpdateTool (siehe http://www.speedtouchforum.de/viewtopic.php?t=1089) runterladen und entpacken.
    c. SpeedTouch per Ethernet/LAN Kabel mit dem PC verbinden
    d. Am PC in den Einstellungen der LAN Verbindung folgendes einstellen:
    IP: 10.0.0.1, Subnetz: 255.255.255.0, Gateway: 10.0.0.138
    e. SpeedTouch vom Strom nehmen
    f. Reset GEDRÜCKT HALTEN und Strom wieder anmachen
    g. Warten bis Power leuchtet (rot glaube ich) und die Ethernet LED blinkt (sollte ca. 10-20 Sekunden dauern). Erst dann den Reset-Knopf wieder loslassen.
    h. Schnell das Firmware UpdateTool starten und die Firmwaredatei auswählen (.bin Datei)
    i. Warten bis das Aufspielen der Firmware erledigt ist (ACHTUNG: nicht die Verbindung trennen oder Strom abschalten, am besten Finger weg vom PC und dem SpeedTouch!)
    j. Die LAN-Einstellung am PC wieder zurückändern auf "IP automatisch" und "DNS Server automatisch"

    2. Eine User.ini Konfiguration vorbereiten:

    a. Eine neue Textdatei erstellen (Notepad.exe öffnen)
    b. Den Text meiner User.ini hinein kopieren (siehe unten)
    c. Ein paar Sektionen anpassen:

    - Die Sektion [mlpuser.ini] mit der aus der vom Anfang gespeicherten User_backup.ini ersetzen

    - In der Sektion [ cwmp.ini ] in den folgenden Zeilen die Stellen "<mein Username Hash>" und "<mein Password Hash>" mit denen aus der User_backup.ini ersetzen:

    Code:

    config state=disabled mode=full periodicInform=enabled periodicInfInt=43200 sessionTimeout=60 noIpTimeout=180 maxEnvelopes=2 connectionRequest=disabled connectionReqPath="" connectionReqUserName=<mein Username Hash> connectionReqPsswd=<mein Password Hash> connectionReqAuth=digest qos-class=12 bootdelayrange=0 persistentSubscription=disabled
    config am1Termination=disabled
    config upgradedelay=disabled
    server config url=http://: username=<mein Username Hash> password=\"\"
    debug traceconfig level=0
    runtimevar softwareVersion=8.2.1.5 bootstrap=disabled parameterkey=""


    - Unter [ dnss.ini ] sind als Beispiel meine PCs im LAN mit statischer IP im DNS eintragen. Dann findet man sie auch unter ihrem Namen. Bitte meine löschen und bei Bedarf eigene eintragen.

    - (optional) Alle Vorkommen, die mit "192.168.178." anfangen durch seine eigene LAN Adressen ersetzen (z.B. "192.168.1.").

    d. Datei speichern (am besten unter User.ini z.B. auf dem Desktop)

    Experten oder wer sich traut, darf sich gerne mal die anderen Bereiche der User.ini ansehen und seinen Bedürfnissen anpassen. Leider musste ich ohne Handbuch auskommen und kann darum nichts zu den meisten Bereichen sagen.

    3. Die neue Konfiguration (User.ini) aufspielen:

    a. Auf die Startseite der Weboberfläche gehen (http://192.168.1.254 im Browser eingeben)
    b. Auf der linken Seite auf "SpeedTouch" =>"Konfiguration"=>"Konfiguration speichern oder wiederherstellen"=>"Durchsuchen" klicken und seine neu erstellte Konfiguration auswählen
    c. Auf "Konfiguration wiederherstellen" klicken, Frage ob man sicher ist mit "Ja" beantworten und ABWARTEN (ca. 1-2 Minuten)

    Der SpeedTouch ist jetzt unter http://192.168.178.1 bzw. der selber in der User.ini geänderten IP erreichbar.

    4. SpeedTouch fertig konfigurieren (WLAN, Firewall, etc.)

    Die restliche Konfiguration für das WLAN, Firewall etc. kann man über die Weboberfläche machen (siehe Handbuch, Gehirn oder Forum). Was man auf keinen Fall mehr ausführen darf ist der Konfigurationsassistent - der ändert nämlich die Ethernet-Buchse 4 wieder zurück!

    Am Ende sollte man eine Sicherungskopie der Konfiguration machen (also wieder über "SpeedTouch"=>"Konfiguration"=>"Konfiguration speichern oder wiederherstellen"=>"Konfiguration Speichern" eine User_backup_<datum>.ini an einem sicheren Ort speichern.)

    5. Wenn was schief geht:

    ... dann zitiere ich immer gerne aus dem "Anhalter": "

    "KEINE PANIK."

    Es kann nämlich nicht viel passieren und es ist dann noch lange nicht alles aus:

    Falls wider Erwarten etwas nicht klappt, kann man immer noch seine alte (oder neue) User.ini wieder aufspielen. Im "schlimmsten" Fall beim Punkt "Router zurücksetzen" wieder anfangen.

    Wenn man keinen Kontakt zum SpeedTouch bekommt, liegt es aber oft auch nur daran, dass man sein LAN-Einstellungen auf dem PC nicht richtig gesetzt hat. Also erst mal die LAN-Einstellungen überprüfen, evtl. ändern und ausprobieren.

    Im Großen und Ganzen also: Ran an den Speck! Nur Mut.



Das war's von mir soweit. Ich hoffe damit einigen weitergeholfen zu haben.

Beste Grüße,
me.
[sprich "mi dot"]


Es folgt noch meine User.ini (wie gesagt, die beschriebenen Bereiche müssen angepasst werden):

Code:


[ sntpc.ini ]
add name=0.de.pool.ntp.org version=3
add name=1.de.pool.ntp.org version=3
add name=2.de.pool.ntp.org version=3
add name=3.de.pool.ntp.org version=3
config poll=60 pollpresync=5
config state=enabled

[ xdsl.ini ]
debug traceconfig level=0
config adslmultimode=adsl2plus detect-lop=enabled syslog=disabled
maxspeed tx=800000 rx=8000000
debug multimode config=default

[ cac.ini ]
config port=dsl0 state=enabled
config port=dsl1 state=enabled
config port=atm2 state=enabled
config port=aal5 state=disabled
config port=atm5 state=disabled
overbooking rt=0 nrt=0

[ language.ini ]
config language=de complete=no

[ script.ini ]
add name=autopvc_add_qos index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_qos index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_qos index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_delete_qos index=0 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_qos index=1 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_qos index=2 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_bridge index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_bridge index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_bridge index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_bridge index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_bridge index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_bridge index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 encaps $19 fcs $20 ulp mac"
add name=autopvc_add_bridge index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_bridge index=7 command="eth bridge ifadd intf _auto_$1_$2_eth dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_bridge index=8 command="eth bridge ifconfig intf _auto_$1_$2_eth"
add name=autopvc_add_bridge index=9 command="eth bridge ifattach intf _auto_$1_$2_eth"
add name=autopvc_delete_bridge index=0 command="eth bridge ifdetach intf _auto_$1_$2_eth"
add name=autopvc_delete_bridge index=1 command="eth bridge ifdelete intf _auto_$1_$2_eth"
add name=autopvc_delete_bridge index=2 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_bridge index=3 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_bridge index=4 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_bridge index=5 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_bridge index=6 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_bridge index=7 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_pppoerelay index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_pppoerelay index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_pppoerelay index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_pppoerelay index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_pppoerelay index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_pppoerelay index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 ulp mac"
add name=autopvc_add_pppoerelay index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_pppoerelay index=7 command="eth ifadd intf _auto_$1_$2_eth dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_pppoerelay index=8 command="eth ifattach intf _auto_$1_$2_eth"
add name=autopvc_add_pppoerelay index=9 command="ppp relay ifadd intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoerelay index=0 command="ppp relay ifdelete intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoerelay index=1 command="eth ifdetach intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoerelay index=2 command="eth ifdelete intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoerelay index=3 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoerelay index=4 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoerelay index=5 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=6 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=7 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_pppoerelay index=8 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_ipoa index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_ipoa index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_ipoa index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_ipoa index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_ipoa index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_ipoa index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 encaps $19 fcs $20 ulp ip"
add name=autopvc_add_ipoa index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_ipoa index=7 command="ip ifadd intf _auto_$1_$2 dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_ipoa index=8 command="ip ifattach intf _auto_$1_$2"
add name=autopvc_delete_ipoa index=0 command="ip ifdetach intf _auto_$1_$2"
add name=autopvc_delete_ipoa index=1 command="ip ifdelete intf _auto_$1_$2"
add name=autopvc_delete_ipoa index=2 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_ipoa index=3 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_ipoa index=4 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_ipoa index=5 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_ipoa index=6 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_ipoa index=7 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_ethoa index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_ethoa index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_ethoa index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_ethoa index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_ethoa index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_ethoa index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 encaps $19 fcs $20 ulp mac"
add name=autopvc_add_ethoa index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_ethoa index=7 command="eth ifadd intf _auto_$1_$2_eth dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_ethoa index=8 command="eth ifattach intf _auto_$1_$2_eth"
add name=autopvc_add_ethoa index=9 command="ip ifadd intf _auto_$1_$2 dest _auto_$1_$2_eth dynamic enabled"
add name=autopvc_add_ethoa index=10 command="ip ifattach intf _auto_$1_$2"
add name=autopvc_delete_ethoa index=0 command="ip ifdetach intf _auto_$1_$2"
add name=autopvc_delete_ethoa index=1 command="ip ifdelete intf _auto_$1_$2"
add name=autopvc_delete_ethoa index=2 command="eth ifdetach intf _auto_$1_$2_eth"
add name=autopvc_delete_ethoa index=3 command="eth ifdelete intf _auto_$1_$2_eth"
add name=autopvc_delete_ethoa index=4 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_ethoa index=5 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_ethoa index=6 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_ethoa index=7 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_ethoa index=8 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_ethoa index=9 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_pppoa index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_pppoa index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_pppoa index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_pppoa index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_pppoa index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_pppoa index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 encaps $19 fcs $20 ulp ppp"
add name=autopvc_add_pppoa index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_pppoa index=7 command="ppp ifadd intf _auto_$1_$2 dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_pppoa index=8 command="ppp ifattach intf _auto_$1_$2"
add name=autopvc_add_pppoa index=9 command="nat ifconfig intf _auto_$1_$2 translation enabled"
add name=autopvc_delete_pppoa index=0 command="ppp ifdetach intf _auto_$1_$2"
add name=autopvc_delete_pppoa index=1 command="ppp ifdelete intf _auto_$1_$2"
add name=autopvc_delete_pppoa index=2 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoa index=3 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoa index=4 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_pppoa index=5 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_pppoa index=6 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_pppoa index=7 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_add_pppoe index=0 command="atm qosbook ctdadd name _auto_$1_$2_tx conformance $3 peakrate $4 sustrate $5 maxburst $6 minrate $7 maxframe $8 celldelay $9 realtime $10 dynamic enabled"
add name=autopvc_add_pppoe index=1 command="atm qosbook ctdadd name _auto_$1_$2_rx conformance $11 peakrate $12 sustrate $13 maxburst $14 minrate $15 maxframe $16 celldelay $17 realtime $18 dynamic enabled"
add name=autopvc_add_pppoe index=2 command="atm qosbook add name _auto_$1_$2 txctd _auto_$1_$2_tx rxctd _auto_$1_$2_rx dynamic enabled"
add name=autopvc_add_pppoe index=3 command="atm phonebook add name _auto_$1_$2 addr $1.$2 dynamic enabled maxFwdCPCS_PDU $21 maxBwdCPCS_PDU $22"
add name=autopvc_add_pppoe index=4 command="atm ifadd intf _auto_$1_$2_atm dest _auto_$1_$2 dynamic enabled"
add name=autopvc_add_pppoe index=5 command="atm ifconfig intf _auto_$1_$2_atm qos _auto_$1_$2 encaps $19 fcs $20 ulp mac"
add name=autopvc_add_pppoe index=6 command="atm ifattach intf _auto_$1_$2_atm"
add name=autopvc_add_pppoe index=7 command="eth ifadd intf _auto_$1_$2_eth dest _auto_$1_$2_atm dynamic enabled"
add name=autopvc_add_pppoe index=8 command="eth ifattach intf _auto_$1_$2_eth"
add name=autopvc_add_pppoe index=9 command="ppp ifadd intf _auto_$1_$2 dest _auto_$1_$2_eth dynamic enabled"
add name=autopvc_add_pppoe index=10 command="ppp ifattach intf _auto_$1_$2"
add name=autopvc_add_pppoe index=11 command="nat ifconfig intf _auto_$1_$2 translation enabled"
add name=autopvc_delete_pppoe index=0 command="ppp ifdetach intf _auto_$1_$2"
add name=autopvc_delete_pppoe index=1 command="ppp ifdelete intf _auto_$1_$2"
add name=autopvc_delete_pppoe index=2 command="eth ifdetach intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoe index=3 command="eth ifdelete intf _auto_$1_$2_eth"
add name=autopvc_delete_pppoe index=4 command="atm ifdetach intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoe index=5 command="atm ifdelete intf _auto_$1_$2_atm"
add name=autopvc_delete_pppoe index=6 command="atm phonebook delete name _auto_$1_$2"
add name=autopvc_delete_pppoe index=7 command="atm qosbook delete name _auto_$1_$2"
add name=autopvc_delete_pppoe index=8 command="atm qosbook ctddelete name _auto_$1_$2_tx"
add name=autopvc_delete_pppoe index=9 command="atm qosbook ctddelete name _auto_$1_$2_rx"
add name=autopvc_change_qos index=0 command="atm ifconfig intf $1 qos $2"
add name=wlbrintfadd index=0 command="eth bridge ifadd intf WL_$1_$2 dynamic enabled"
add name=wlbrintfadd index=1 command="eth bridge ifconfig intf WL_$1_$2 dest wl_ssid$1_$2"
add name=wlbrintfadd index=2 command="eth bridge ifattach intf WL_$1_$2"
add name=wlbrintfdel index=0 command="eth bridge ifdetach intf WL_$1_$2"
add name=wlbrintfdel index=1 command="eth bridge ifdelete intf WL_$1_$2"

[ env.ini ]
set var=Custo_Version value=Rel${_BUILD}_GeChGenV4.1
set var=WL0_SSID value=${_WL0_SSID_PREFIX}${_WL0_SSID_SERIAL}
set var=IP1_range value=${IP1_Address}/${IP1_Netmask}
set var=IP2_range value=${IP2_Address}/${IP2_Netmask}
set var=TR69_URL value=http://${TR69_ServAddr}:${TR69_Port}${TR69_path}
set var=CONF_DEVICE value=585
set var=CONF_DESCRIPTION value="Manuelle Konfiguration; WLAN-Funktionen können konfiguriert werden [Sicherheit:WPA/WEP/Offen, Netzwerkname [SSID]: anzeigen/nicht anzeigen, Registrierung: Art festlegen]."
set var=CONF_SERVICE value="dem_me_dot_seine_konfig"
set var=CONF_REGION value=Deutschland/Schweiz
set var=CONF_PROVIDER value="Provider auswählbar"
set var=HOST_SETUP value=auto
set var=HOST_LANGUAGE value=en
set var=UPGRADE_URL value=http://www.speedtouch.com/upgrade/upgrade.htm
set var=ST_Config_Type value=Router
set var=Intf1_PVC value=1.32
set var=Intf2_PVC value=8.35
set var=Intf1_PPP_Type value=mac
set var=Intf2_PPP_Type value=mac
set var=VOIP_SIPProv value=None
set var=DEFAULT_ROUTER_IP value=192.168.178.1
set var=DEFAULT_NETMASK value=255.255.255.0
set var=DEFAULT_START_IP value=192.168.178.100
set var=DEFAULT_END_IP value=192.168.178.200
set var=ST_DHCP_SRV_ACTIVE value=enabled
set var=Dat1_Intf_Name value=Internet
set var=Dat1_Nat_trans value=enabled
set var=ppp_dial_ontime value=7200
set var=ppp_dial_direction value=Tx
set var=ppp_dial value=never
set var=ST_WF_WPA value=1
set var=ST_WF_WEP_ASC value=1
set var=CWMPUSER value=${_OUI}-${_PROD_SERIAL_NBR}
set var=ATM_addr value=Standard
set var=Registration value=unlock
set var=Kanal value=auto
set var=Security_Level value=WPA+WPA2
set var=SSID value=enabled
set var=ST_USERID value=admin
set var=CONF_TEMPLATE value=1ST585Advneu_V1b.tpl.gz
set var=CONF_USR_COMMENT value="Configuration created by Embedded Wizard (profile:active/1ST585Advneu_V1b.tpl.gz)"
set var=CONF_DATE value="Configuration modified manually"
set var=ACS_URL value=http://:
set var=CONF_TPVERSION value=2.0.0

[ wizard.ini ]

[ phone.ini ]

[ ipqos.ini ]

[ qos.ini ]
config format=bytes
ctdadd name=default conformance=UBR
add name=default txctd=default rxctd=default

[ atm.ini ]

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
modify port=dsl0 blocking=enabled
modify port=dsl1 blocking=enabled
modify port=atm2 blocking=enabled
modify port=atm3 blocking=enabled
modify port=aal5 blocking=enabled
modify port=atm5 blocking=enabled

[ snmp.ini ]
config sysContact="Service Provider" sysName="SpeedTouch 585i v6" sysLocation="Customer Premises"
community add index=ROCommunity securityname=ROCommunity communityname=_DEV_8997E3DD69CEC9EF

[ vlan_res.ini ]
add name=wan vid=2 addrule=disabled

[ bridge.ini ]
ifadd brname=bridge intf=ethport2 dest=ethif2 logging=disabled
ifadd brname=bridge intf=ethport3 dest=ethif3 logging=disabled
ifadd brname=bridge intf=WLAN dest=wlif1 logging=disabled
ifconfig brname=bridge intf=ethport1 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport2 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport3 wan=disabled logging=disabled
ifconfig brname=bridge intf=WLAN wan=disabled logging=disabled
ifattach brname=bridge intf=ethport2 logging=disabled
ifattach brname=bridge intf=ethport3 logging=disabled
ifattach brname=bridge intf=WLAN logging=disabled
config brname=bridge age=300 filter=no_WAN_broadcast vlan=disabled precedencemap=4,7,9,11,13,14,15,15

[ filter_operand.ini ]

[ filter_template.ini ]

[ filter_sync.ini ]
loadobjects dmtree=atomic path=Bridge
loadobjects dmtree=atomic path=Interface

[ filter_brfilter.ini ]

[ vlanbridge.ini ]

[ bridgevlan.ini ]

[ vlanbridgerule.ini ]
add type=shared vlan=wan vlan2=default

[ bridgeintfxtratag.ini ]

[ bridgeunknownvlan.ini ]

[ dvm_res.ini ]
config timeout=90

[ igmpsnooping.ini ]
ifconfig brname=bridge intf=OBC portmode=Auto fastleave=enabled exptrack=disabled mrdp=enabled rgmp=disabled
ifconfig brname=bridge intf=ethport1 portmode=Auto fastleave=disabled exptrack=disabled mrdp=enabled rgmp=disabled
ifconfig brname=bridge intf=ethport2 portmode=Auto fastleave=disabled exptrack=disabled mrdp=enabled rgmp=disabled
ifconfig brname=bridge intf=ethport3 portmode=Auto fastleave=disabled exptrack=disabled mrdp=enabled rgmp=disabled
ifconfig brname=bridge intf=WLAN portmode=Auto fastleave=disabled exptrack=disabled mrdp=enabled rgmp=disabled
config brname=bridge state=enabled floodrp=disabled floodmcast=disabled

[ eth.ini ]
ifadd intf=WAN
ifconfig intf=WAN dest=ethif4 vlan=wan
ifattach intf=WAN

[ pptp.ini ]

[ ppprelay.ini ]
ifadd intf=bridge

[ dhcspool.ini ]
pool add name=LAN_private

[ label.ini ]
add name=DSCP
add name=Interactive
add name=Management
add name=Video
add name=VoIP-RTP
add name=VoIP-Signal
add name=default
modify name=DSCP classification=overwrite defclass=dscp ackclass=prioritize
modify name=Interactive classification=increase defclass=8 ackclass=6
modify name=Management classification=increase defclass=12 ackclass=12
modify name=Video classification=increase defclass=10 ackclass=10
modify name=VoIP-RTP classification=overwrite defclass=14 ackclass=14 bidirectional=enabled
modify name=VoIP-Signal classification=overwrite defclass=12 ackclass=12 bidirectional=enabled
modify name=default classification=increase defclass=default ackclass=prioritize

[ ppp.ini ]

[ ip.ini ]
ifadd intf=Internet dest=WAN
ifadd intf=LocalNetwork dest=bridge
ifconfig intf=loop mtu=65535 group=local symmetric=enabled
ifconfig intf=Internet mtu=1500 group=wan linksensing=enabled
ifconfig intf=LocalNetwork mtu=1500 group=lan linksensing=disabled primary=enabled
ifattach intf=Internet
ifattach intf=LocalNetwork
config forwarding=enabled redirects=enabled netbroadcasts=disabled ttl=64 fraglimit=64 defragmode=enabled addrcheck=dynamic mssclamping=enabled
config checkoptions=enabled
config natloopback=enabled
config arpclass=4
config
ipadd intf=LocalNetwork addr=10.0.0.138/24 addroute=enabled
ipadd intf=LocalNetwork addr=192.168.178.1/24 addroute=enabled
ipconfig addr=192.168.178.1 preferred=enabled primary=enabled
rtadd dst=255.255.255.255/32 gateway=127.0.0.1
rtadd dst=224.0.0.0/4 intf=LocalNetwork

[ autoip.ini ]

[ ipqosmeter.ini ]

[ igmh.ini ]
config requirera=disabled

[ autopvc.ini ]
config mode=passive type=bridge overwrite=disabled peakrate=0

[ mcast.ini ]

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=32

[ dnsc.ini ]
config timeout=5 retry=4 search=enabled trace=disabled
dnsadd addr=127.0.0.1 port=53

[ dnss.ini ]
config domain=catv.wtnet.de timeout=15 suppress=0 state=enabled trace=disabled syslog=disabled WANDownSpoofing=enabled WDSpoofedIP=198.18.1.0
host add name=speedtouch addr=0.0.0.0 ttl=1200
host add name=dsldevice addr=0.0.0.0 ttl=1200
host add name=meinPC addr=192.168.178.42 ttl=1200
host add name=meinLaptop addr=192.168.178.23 ttl=1200

[ dhcrule.ini ]
debug traceconfig state=disabled

[ dhcs.ini ]
debug traceconfig state=disabled
policy verifyfirst=enabled trustclient=enabled rtbehaviour=traditional
pool config name=LAN_private state=enabled intf=LocalNetwork poolstart=192.168.178.100 poolend=192.168.178.200 netmask=24 gateway=192.168.178.1 server=192.168.178.1 leasetime=86400

[ dhcr.ini ]
ifconfig intf=LocalNetwork relay=enabled
add name=LocalNetwork_to_127.0.0.1
modify name=LocalNetwork_to_127.0.0.1 addr=127.0.0.1 intf=LocalNetwork giaddr=192.168.178.1

[ dhcc.ini ]
debug traceconfig state=disabled
ifadd intf=Internet
ifconfig intf=Internet metric=1 dnsmetric=1 broadcast=enabled
rqoptions add intf=Internet option=default-routers
rqoptions add intf=Internet option=domain-name-servers
rqoptions add intf=Internet option=subnet-mask
rqoptions add intf=Internet option=host-name
rqoptions add intf=Internet option=domain-name
rqoptions add intf=Internet option=time-servers
rqoptions add intf=Internet option=broadcast-address
rqoptions add intf=Internet option=dhcp-lease-time
rqoptions add intf=Internet option=dhcp-renewal-time
rqoptions add intf=Internet option=dhcp-rebinding-time
ifattach intf=Internet

[ upgrade.ini ]
config state=disabled protocol=tftp
debug traceconfig state=disabled
profile add extension=sts destdir=dl maxsize(KBytes)=100 action=script_load
profile add extension=ini destdir=dl maxsize(KBytes)=100 action=config_load

[ dyndns.ini ]
service modify name=dyndns server=members.dyndns.org port=www-http request=/nic/update updateinterval=2097120 retryinterval=30 max_retry=3
service modify name=statdns server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=custom server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=No-IP server=dynupdate.no-ip.com port=www-http request=/ducupdate.php updateinterval=86400 retryinterval=30 max_retry=3
service modify name=DtDNS server=dtdns.com port=www-http request=/api/autodns.cfm updateinterval=86400 retryinterval=30 max_retry=3
service modify name=gnudip port=www-http

[ expr.ini ]
add name=wan type=intf intfgroup=wan
add name=local type=intf intfgroup=local
add name=lan type=intf intfgroup=lan
add name=tunnel type=intf intfgroup=tunnel
add name=dmz type=intf intfgroup=dmz
add name=guest type=intf intfgroup=guest
add name=RemManIntfgrp type=intf intf=Internet
add name=private type=ip addr=10.0.0.* mask=0
add name=private type=ip addr=172.[16-31].*.* mask=0
add name=private type=ip addr=192.168.178.* mask=0
add name=ssdp_ip type=ip addr=239.255.255.250 mask=0
add name=mdap_ip type=ip addr=224.0.0.103 mask=0
add name=tracert_udp type=serv proto=udp dstport=33434 dstportend=33440
add name=http_remote type=serv proto=tcp dstport=www-http
add name=ftp_remote type=serv proto=tcp dstport=ftp
add name=telnet_remote type=serv proto=tcp dstport=telnet
add name=CWMPSin type=serv proto=tcp dstport=51005
add name=http_rem_out type=serv proto=tcp srcport=www-http
add name=ftp_rem_out type=serv proto=tcp srcport=ftp
add name=telnet_rem_out type=serv proto=tcp srcport=telnet
add name=CWMPSout type=serv proto=tcp srcport=51005
add name=icmp type=serv proto=icmp
add name=igmp type=serv proto=igmp
add name=ftp type=serv proto=tcp dstport=ftp
add name=telnet type=serv proto=tcp dstport=telnet
add name=http type=serv proto=tcp dstport=www-http
add name=httpproxy type=serv proto=tcp dstport=httpproxy
add name=https type=serv proto=tcp dstport=443
add name=RPC type=serv proto=tcp dstport=135
add name=NBT type=serv proto=udp dstport=netbios-ns
add name=NBT type=serv proto=udp dstport=netbios-dgm
add name=NBT type=serv proto=tcp dstport=netbios-ssn
add name=SMB type=serv proto=tcp dstport=445
add name=imap type=serv proto=tcp dstport=imap2
add name=imap3 type=serv proto=tcp dstport=imap3
add name=imap4-ssl type=serv proto=tcp dstport=585
add name=imaps type=serv proto=tcp dstport=993
add name=pop2 type=serv proto=tcp dstport=pop2
add name=pop3 type=serv proto=tcp dstport=pop3
add name=pop3s type=serv proto=tcp dstport=995
add name=smtp type=serv proto=tcp dstport=smtp
add name=ssh type=serv proto=tcp dstport=22
add name=dns type=serv proto=tcp dstport=dns
add name=dns type=serv proto=udp dstport=dns
add name=nntp type=serv proto=tcp dstport=nntp
add name=ipsec type=serv proto=ah
add name=ipsec type=serv proto=esp
add name=ipsec type=serv proto=udp dstport=ike
add name=ipsec type=serv proto=udp dstport=4500
add name=esp type=serv proto=esp
add name=ah type=serv proto=ah
add name=ike type=serv proto=udp dstport=ike
add name=DiffServ type=serv dscp=!cs0
add name=sip type=serv proto=udp dstport=sip
add name=sip type=serv proto=tcp dstport=sip
add name=h323 type=serv proto=tcp dstport=h323
add name=h323 type=serv proto=udp dstport=h323
add name=h323 type=serv proto=tcp dstport=1718
add name=h323 type=serv proto=udp dstport=1718
add name=h323 type=serv proto=tcp dstport=1719
add name=h323 type=serv proto=udp dstport=1719
add name=dhcp type=serv proto=udp dstport=bootpc
add name=dhcp type=serv proto=udp dstport=bootps
add name=rtsp type=serv proto=udp dstport=rtsp
add name=rtsp type=serv proto=tcp dstport=rtsp
add name=ssdp_serv type=serv proto=udp dstport=1900
add name=mdap_serv type=serv proto=udp dstport=3235
add name=syslog type=serv proto=udp dstport=syslog

[ labelrule.ini ]
chain add chain=rt_user_labels
chain add chain=rt_default_labels
chain add chain=qos_user_labels
chain add chain=qos_default_labels
rule add chain=qos_user_labels index=1 name=own_services serv=tracert_udp log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=2 name=own_services serv=http_remote log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=3 name=own_services serv=ftp_remote log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=4 name=own_services serv=telnet_remote log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=5 name=own_services serv=telnet_rem_out log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=6 name=own_services serv=ftp_rem_out log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=7 name=own_services serv=http_rem_out log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=8 name=own_services serv=CWMPSin log=disabled state=enabled label=Management
rule add chain=qos_user_labels index=9 name=own_services serv=CWMPSout log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=1 serv=h323 log=disabled state=enabled label=VoIP-Signal
rule add chain=qos_default_labels index=2 serv=sip log=disabled state=enabled label=VoIP-Signal
rule add chain=qos_default_labels index=3 serv=ah log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=4 serv=esp log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=5 serv=http log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=6 serv=httpproxy log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=7 serv=https log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=8 serv=imap log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=9 serv=imap3 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=10 serv=imap4-ssl log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=11 serv=imaps log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=12 serv=pop2 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=13 serv=pop3 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=14 serv=pop3s log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=15 serv=smtp log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=16 serv=telnet log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=17 serv=dns log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=18 serv=icmp log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=19 serv=ike log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=20 serv=igmp log=disabled state=enabled label=Video
rule add chain=qos_default_labels index=21 serv=rtsp log=disabled state=enabled label=Video
rule add chain=qos_default_labels index=22 serv=DiffServ log=disabled state=enabled label=DSCP
rule add chain=qos_default_labels index=23 name=default srcintf=!wan log=disabled state=enabled label=default

[ ids.ini ]
config state=enabled
signature modify signature=spoofed_packet state=disabled

[ ids_threshold.ini ]
modify index=1 window=1 limit=10 scaling=disabled
modify index=2 window=20 limit=20 scaling=enabled
modify index=3 window=2 limit=100 scaling=disabled
modify index=4 window=1 limit=200 scaling=disabled
modify index=5 window=1 limit=200 scaling=disabled
modify index=6 window=1 limit=200 scaling=disabled
modify index=7 window=1 limit=200 scaling=disabled

[ cwmp.ini ]
config state=disabled mode=full periodicInform=enabled periodicInfInt=43200 sessionTimeout=60 noIpTimeout=180 maxEnvelopes=2 connectionRequest=disabled connectionReqPath="" connectionReqUserName=<mein Username Hash> connectionReqPsswd=<mein Password Hash> connectionReqAuth=digest qos-class=12 bootdelayrange=0 persistentSubscription=disabled
config am1Termination=disabled
config upgradedelay=disabled
server config url=http://: username=<mein Username Hash> password=\"\"
debug traceconfig level=0
runtimevar softwareVersion=8.2.1.5 bootstrap=disabled parameterkey=""

[ nat.ini ]
ifconfig intf=Internet translation=enabled
config

[ igmp.ini ]
config state=disabled qi=125 qri=10 lmqi=1 rv=2 advinter=20 initadvinter=2 initadvcount=3 requirera=disabled localgroup=disabled
ifconfig intf=LocalNetwork state=downstream version=IGMPv3 fastleave=disabled exptrack=disabled mrd=disabled
ifconfig intf=Internet state=inactive

[ ipqosef.ini ]

[ connection.ini ]
appconfig application=IP6TO4 trace=enabled
appconfig application=PPTP trace=enabled timeout=300
appconfig application=ESP timeout=900
appconfig application=IKE trace=disabled timeout=900 floating=enabled
appconfig application=SIP trace=disabled timeout=21600 childqos=VoIP-RTP floating=enabled
appconfig application=SIP childqos=VoIP-RTP SIP_ALG=enabled RTP_predict_for_term_SIP_ALG=enabled
appconfig application=JABBER trace=disabled timeout=120
appconfig application=CU/SeeMe trace=enabled
appconfig application=RAUDIO(PNA) trace=enabled
appconfig application=RTSP trace=enabled timeout=0
appconfig application=ILS timeout=300
appconfig application=H245 timeout=300
appconfig application=H323 trace=enabled
appconfig application=IRC trace=enabled timeout=300
appconfig application=GAME(UDP) trace=enabled timeout=60
appconfig application=CONE(UDP) trace=enabled timeout=300
appconfig application=LOOSE(UDP) trace=enabled timeout=300
appconfig application=FTP trace=enabled
bind application=LOOSE(UDP) port=69-69
bind application=LOOSE(UDP) port=67-67
bind application=CONE(UDP) port=3478-3478
bind application=IP6TO4 port=0
bind application=PPTP port=1723-1723
bind application=ESP port=0
bind application=IKE port=500-500
bind application=SIP port=5060-5060
bind application=CU/SeeMe port=7648-7648
bind application=RAUDIO(PNA) port=7070-7070
bind application=RTSP port=554-554
bind application=ILS port=389-389
bind application=ILS port=1002-1002
bind application=H323 port=1720-1720
bind application=IRC port=6660-6669
bind application=FTP port=21-21
bind application=JABBER port=5222-5222
bind application=JABBER port=15222-15222
bind application=GAME(UDP) port=27010-27011
config configchangemode=immediate probes=disabled
debug trace=disabled
timerconfig timer=tcpidle value=900
timerconfig timer=tcpneg value=120
timerconfig timer=tcpkill value=3600
timerconfig timer=udpidle value=65
timerconfig timer=udpkill value=60
timerconfig timer=icmpkill value=60
timerconfig timer=ipidle value=60
timerconfig timer=ipkill value=0
timerconfig timer=aiprefresh value=60

[ switch.ini ]
mirror capture port=1

[ upnp.ini ]
config maxage=1800 writemode=full safenat=disabled

[ system.ini ]
settime timezone=+01:00 daylightsaving=enabled geotimezone=26
config upnp=disabled tr64=disabled mdap=enabled drst=disabled resetbutton=enabled
config digestauth=enabled
config autosave=enabled autosavedelay=10
locale dec_symbol=, group_symbol=. date_separator=- date_format=ddmmyyyy time_format=iso datetime_format=date+time duration_format=dhmmss

[ system_debug.ini ]
autosave trace=disabled

[ system_raccess.ini ]
config secure=enabled port=51003 timeout=20

[ dsd.ini ]
intercept config WDSpoofedIP=198.18.1.1 servertimeout=10 connecterrorurl=/cgi/b/ic/connect/ categoryerrorurl=/cgi/b/ic/connect/ monitorintercepturl=/cgi/b/ic/connect/ unauthorizedrequrl=/cgi/b/ic/blocked/ imageredirect=enabled imageredirecturl=/images/spacer.gif alwaysuseip=disabled
urlfilter config state=disabled blockproxy=disabled blockipaddress=disabled blockobscuredip=disabled defaultaction=accept
syslog config syslog=unauthorized
debug config turbomode=enabled
debug proxy state=disabled dest=0.0.0.0 port=0
debug recycling state=enabled interval=5 httpidle=1 otheridle=12
config state=disabled

[ hostmgr.ini ]
config state=enabled scantime=30 autosave=disabled

[ mlp.ini ]

[ mlpuser.ini ]
<hier eure Eintragung!>

[ argroupmember.ini ]

[ tls.ini ]
acs-client config state=enabled auth-serv=enabled valid-date=disabled valid-domain=disabled
https-server config state=enabled auth-client=disabled valid-date=disabled valid-domain=disabled

[ wireless.ini ]
ifconfig state=enabled
ifconfig interop=802.11b/g locale=Europe
ifconfig channel=auto ssid=Sprawl any=enabled rts=2347 protection=auto protmode=ctstoself prottrigger=local&overlap shortslot=auto frameburst=disabled dtim=3
qos config mode=wmm ackpolicy=normal apsd=yes
qos apacconfig class=AC_BE acm=disabled cwmax=63 cwmin=15 aifsn=3 txop=0
qos apacconfig class=AC_BK acm=disabled cwmax=1023 cwmin=15 aifsn=7 txop=0
qos apacconfig class=AC_VI acm=disabled cwmax=15 cwmin=7 aifsn=1 txop=94
qos apacconfig class=AC_VO acm=disabled cwmax=7 cwmin=3 aifsn=1 txop=47
qos staacconfig class=AC_BE acm=disabled cwmax=1023 cwmin=15 aifsn=3 txop=0
qos staacconfig class=AC_BK acm=disabled cwmax=1023 cwmin=15 aifsn=7 txop=0
qos staacconfig class=AC_VI acm=disabled cwmax=15 cwmin=7 aifsn=2 txop=94
qos staacconfig class=AC_VO acm=disabled cwmax=7 cwmin=3 aifsn=2 txop=47
macacl config ssid_id=0 control=unlock
secmode wep encryptionkey=YOURKEY
secmode wpa-psk presharedkey="YOURKEY" rekeysec=0 version=WPA+WPA2
secmode config mode=wpa-psk
wds config state=enabled

[ tod.ini ]
config acchain=""
config state=disabled

[ statecheck.ini ]
config interval=30 timeout=3600 groupop=or dmtree=atomic

[ service.ini ]
add name="AIM Talk" mode=client
add name=BearShare mode=server
add name=BitTorrent mode=client
add name="Checkpoint FW1 VPN" mode=server
add name="Counter Strike" mode=server
add name="DirectX 7" mode=server
add name="DirectX 8" mode=server
add name="DirectX 9" mode=server
add name=eMule mode=server
add name="FTP Server" mode=server
add name="Gamespy Arcade" mode=server
add name="HTTP Server (World Wide Web)" mode=server
add name="HTTPS Server" mode=server
add name=iMesh mode=server
add name=KaZaA mode=server
add name="Mail Server (SMTP)" mode=server
add name="Microsoft Remote Desktop" mode=server
add name="MSN Game Zone" mode=server
add name="MSN Game Zone (DX)" mode=server
add name="NNTP Server" mode=server
add name="PPTP Server" mode=server
add name="Secure Shell Server (SSH)" mode=server
add name="Steam Games" mode=server
add name="Telnet Server" mode=server
add name=VNC mode=server
add name="Xbox Live" mode=server
rule add name="AIM Talk" protocol=tcp portrange=5190-5190 triggerport=4099 triggerprotocol=tcp
rule add name=BearShare protocol=tcp portrange=6346-6346
rule add name=BitTorrent protocol=tcp portrange=6881-6889
rule add name="Checkpoint FW1 VPN" protocol=tcp portrange=259-259
rule add name="Checkpoint FW1 VPN" protocol=udp portrange=259-259
rule add name="Counter Strike" protocol=udp portrange=1200-1200
rule add name="Counter Strike" protocol=udp portrange=27000-27015
rule add name="Counter Strike" protocol=tcp portrange=27030-27039
rule add name="DirectX 7" protocol=udp portrange=2302-2400
rule add name="DirectX 7" protocol=udp portrange=47624-47624
rule add name="DirectX 8" protocol=udp portrange=2302-2400
rule add name="DirectX 8" protocol=udp portrange=6073-6073
rule add name="DirectX 9" protocol=udp portrange=2302-2400
rule add name="DirectX 9" protocol=udp portrange=6073-6073
rule add name=eMule protocol=tcp portrange=4662-4662
rule add name=eMule protocol=udp portrange=4672-4672
rule add name="FTP Server" protocol=tcp portrange=21-21
rule add name="Gamespy Arcade" protocol=udp portrange=6500-6500
rule add name="Gamespy Arcade" protocol=udp portrange=6700-6700
rule add name="Gamespy Arcade" protocol=udp portrange=12300-12300
rule add name="Gamespy Arcade" protocol=udp portrange=27900-27900
rule add name="Gamespy Arcade" protocol=tcp portrange=28900-28900
rule add name="Gamespy Arcade" protocol=udp portrange=23000-23009
rule add name="HTTP Server (World Wide Web)" protocol=tcp portrange=80-80
rule add name="HTTPS Server" protocol=tcp portrange=443-443
rule add name=iMesh protocol=tcp portrange=1214-1214
rule add name=KaZaA protocol=tcp portrange=1214-1214
rule add name="Mail Server (SMTP)" protocol=tcp portrange=25-25
rule add name="Mail Server (SMTP)" protocol=udp portrange=25-25
rule add name="Microsoft Remote Desktop" protocol=tcp portrange=3389-3389
rule add name="Microsoft Remote Desktop" protocol=udp portrange=3389-3389
rule add name="MSN Game Zone" protocol=tcp portrange=6667-6667
rule add name="MSN Game Zone" protocol=udp portrange=6667-6667
rule add name="MSN Game Zone" protocol=tcp portrange=28800-29000
rule add name="MSN Game Zone" protocol=udp portrange=28800-29000
rule add name="MSN Game Zone (DX)" protocol=tcp portrange=2300-2400
rule add name="MSN Game Zone (DX)" protocol=udp portrange=2300-2400
rule add name="MSN Game Zone (DX)" protocol=tcp portrange=47624-47624
rule add name="MSN Game Zone (DX)" protocol=udp portrange=47624-47624
rule add name="NNTP Server" protocol=tcp portrange=119-119
rule add name="NNTP Server" protocol=udp portrange=119-119
rule add name="PPTP Server" protocol=tcp portrange=1723-1723
rule add name="Secure Shell Server (SSH)" protocol=tcp portrange=22-22
rule add name="Steam Games" protocol=tcp portrange=27030-27039
rule add name="Steam Games" protocol=udp portrange=1200-1200
rule add name="Steam Games" protocol=udp portrange=27000-27015
rule add name="Telnet Server" protocol=tcp portrange=23-23
rule add name=VNC protocol=tcp portrange=5500-5500
rule add name=VNC protocol=udp portrange=5500-5500
rule add name=VNC protocol=tcp portrange=5800-5800
rule add name=VNC protocol=udp portrange=5800-5800
rule add name=VNC protocol=tcp portrange=5900-5900
rule add name=VNC protocol=udp portrange=5900-5900
rule add name="Xbox Live" protocol=udp portrange=88-88
rule add name="Xbox Live" protocol=tcp portrange=3074-3074
rule add name="Xbox Live" protocol=udp portrange=3074-3074

[ fwlevel.ini ]
add name=BlockAll index=1 readonly=enabled udptrackmode=strict service=disabled proxy=disabled text="Use this Security Level to block all traffic from and to the Internet. Game & Application sharing is not allowed by the firewall."
add name=Standard index=2 readonly=enabled udptrackmode=loose service=enabled proxy=enabled text="Use this Security Level to allow all outgoing connections and block all incoming traffic. Game & Application sharing is allowed by the firewall."
add name=Disabled index=3 readonly=enabled udptrackmode=loose service=enabled proxy=enabled text="Disable the firewall. All traffic is allowed to pass through your gateway. Game & Application sharing is allowed by the firewall."
set name=Disabled

[ firewall.ini ]
config state=enabled keep=disabled tcpchecks=none udpchecks=enabled icmpchecks=enabled logdefault=disabled logthreshold=enabled tcpwindow=65536
rule add chain=sink_fire index=1 name=udptracert srcintf=lan serv=tracert_udp log=disabled state=enabled action=accept
rule add chain=sink_fire index=2 name=udptracert srcintf=RemManIntfgrp serv=tracert_udp log=disabled state=disabled action=accept
rule add chain=sink_fire index=3 name=CWMPSincome srcintf=RemManIntfgrp serv=CWMPSin log=disabled state=disabled action=accept
rule add chain=source_fire index=1 name=AnyTraffic log=disabled state=enabled action=accept
rule add chain=forward_level_BlockAll index=1 name=AnyTraffic log=disabled state=enabled action=drop
rule add chain=forward_level_Standard index=1 name=FromLAN srcintf=lan log=disabled state=enabled action=accept
rule add chain=forward_level_Disabled index=1 name=AnyTraffic log=disabled state=enabled action=accept

[ servmgr.ini ]
ifadd name=PPTP group=lan
ifadd name=HTTP group=lan
ifadd name=HTTPs group=lan
ifadd name=HTTPs group=wan
ifadd name=FTP group=lan
ifadd name=TELNET group=lan
ifadd name=DNS-S group=lan
ifadd name=SNMP_AGENT group=lan
ifadd name=SSDP group=lan
ifadd name=MDAP group=lan
ifadd name=PING_RESPONDER group=lan
modify name=PPTP state=enabled
modify name=SNTP state=enabled
modify name=SLA_ICMP_PING state=disabled
modify name=SLA_UDP_PING state=disabled
modify name=HTTP state=enabled
modify name=HTTPs state=enabled port=26415
modify name=WEBF state=disabled
modify name=TFTP-C state=disabled
modify name=FTP state=enabled
modify name=TELNET state=enabled
modify name=RIP state=disabled
modify name=IGMP-Proxy state=disabled
modify name=DNS-S state=enabled
modify name=DNS-C state=enabled
modify name=DHCP-S state=enabled
modify name=SNMP_AGENT state=disabled
modify name=SSDP state=enabled
modify name=MDAP state=enabled
modify name=CWMP-C state=disabled
modify name=CWMP-S state=disabled
modify name=IP_COMMANDS state=enabled
modify name=PING_RESPONDER state=enabled
mapadd name=HTTP port=www-http
mapadd name=HTTPs port=26415
mapadd name=HTTPI intf=LocalNetwork port=www-http
mapadd name=HTTPI intf=LocalNetwork port=1080
mapadd name=HTTPI intf=LocalNetwork port=httpproxy
mapadd name=FTP port=ftp
mapadd name=TELNET port=telnet
mapadd name=DNS-S port=dns
mapadd name=SNMP_AGENT port=snmp
mapadd name=SSDP port=1900
mapadd name=MDAP port=3235

[ kta.ini ]

[ kti.ini ]

[ koa.ini ]
a d="" l=yes

[ koi.ini ]
a d="" l=yes

[ endofarch ]
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
 
Neues Thema eröffnen Neue Antwort erstellen SpeedTouchforum Foren-Übersicht | Fragen zum SpeedTouch 585i    Seite 1 von 1
Vorheriges Thema anzeigen
Nächstes Thema anzeigen
Beiträge der letzten Zeit anzeigen:   




Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.